Produk berhasil ditambahkan ke cart.
Jumlah
Jumlah
Terdapat 0 item pada cart Anda. 1 item di cart.
Total produk :
Total ongkos kirim : Gratis ongkos kirim!
Jumlah :
.
.
Diskon
Arduino Starter Kit...
Rp. 350.000 Rp. 310.000
PENTING!! : Untuk arduino nano ch340 tidak di sertakan dengan kabel data. Kabel data di jual terpisah
Pakai OLD BOOTLOADER!
Specs:
Microcontroller: ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) of which 2 KB used by bootloader
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16 MHz
Dimensions: 43 x 18 x 19mm
Weight: 6g
Installing Driver
here for the driver software : http://www.wch.cn/downloads.php?name=pro&proid=65
Before connecting the Nano to your USB port:
- Download the “ch341ser,exe” file and run it.The software extracts about 8 files.
- The software asks whether it can install the CH341SER.INF driver for the CH340 chip (Version 11/04/2011, 3.3.2011.11). Click INSTALL
- A Windows message asks whether the driver has installed correctly. Click YES.
- Connect your Nano.
- From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX)
*Note: This is not an original Arduino brand product, it is manufactured with the same components and functionality by a different manufacturer.
