USB RF Remote Controller 14 Key 5-24V for RGB LED Strip WS2811 WS2812

USB RF Remote Controller 14 Key 5-24V for RGB LED Strip WS2811 WS2812

Product introduction:
RF14 key with lock Symphony Controller, using DC5-24V voltage power supply, very suitable for 1903, 2811 2812 and other single-line control IC light strips, diverse effects, simple operation, and a wide range of applications.

Product features:

1. RF radio frequency wireless control, distance up to 20 meters, sensitive and user-friendly operation, small size, simple and convenient wiring;
2. Support custom single-wire control IC common on the market;
3. Comes with more than 300 kinds of patterns The effect is dazzling and smart;
4. The number of cascading points can be adjusted, with up to 2048 pixels at most;
5. With the function of saving when power-off;
6. With the function of grayscale adjustment;
7. The power supply has the function of anti-reverse connection.

Product working parameters:

Rated voltage: DC5-24V general;
Support IC: 2811/2812/1903/6812/6822 and most of the single-wire control ICs on the market;
Mode: 316variablemodes;
Remote control mode: RF wireless radio remote control;
Frequency: 433.92mHz;
Working temperature: -20-60℃.
Controller distance: 15-20 meters.
Support maximum pixels: 2048;
Maximum current: 6A.

Introduction to the main key functions of the remote control:

1. Lamp test function:
Long press the "Auto" button on the remote control for 5 seconds to enter the RGB colorful jump mode, which is convenient for lamp test; short press the "Auto" button, automatic loop playback comes with Program change effect.

2. Remote control ID matching:
long press the "lock" button on the remote control for 5 seconds, the remote control and the controller are matched one-to-one (the light bar flashes green 3 times), press the "lock" button again for 5 seconds, Unmatch (the white light of the light bar flashes three times).

3. Adjust the number of cascade points:
The controller factory defaults to control 600 points, the maximum can be adjusted to 2048 points, and the minimum can be adjusted to 32 points. Long press the "Settings" button for 5 seconds to enter the setting menu, the lamp flashes white light and then always bright white light, press "MODE+" and "MODE-" to adjust the number of LED points, each press will increase or decrease 32 points, and finally press Set the key once to confirm the completion of the setting.

4. Adjust the RGB sequence:
press the R/G/B button to adjust the RGB sequence, press the monochrome "R" key until the light bar shows red. Press the single-color "G" key until the light bar shows green; press the single-color "B" key until the light bar shows blue, after adjusting, press the "set" key to exit.

5. Grabbing effect: In
auto play mode, press the "set" button once, and then press the "lock" button once to capture the current effect and play it in a loop.