Motor DC RS895 12-24v Double Ball Bearing High Speed High Torque

Motor DC RS895 12-24v Double Ball Bearing High Speed High Torque

895 motors are suitable for: micro cutting machines, belt abrasive machines, lathes, milling machines, bench drills, electric drills, polishing machines, bead machines, lawn mowers, wire saws, band saws, electric grinders, engraving machines, scooters, etc.

895 high-speed version: the torque is about 4.2 kg at 6000 rpm at 12V, and about 8 kg at 12000 rpm at 24V

Power supply requirements: The starting current should be above 10A. It is recommended to use switching power supply or battery power supply. It is recommended to use 360W24V15A switching power supply, or 12V15A switching power supply. Household 220V power cannot be used directly.

High-speed version no-load current: 12V no-load about 1.15A, 24V no-load about 1.51A

Steering: forward and reverse

Step height: 5mm  

Step diameter: 18mm     

Diameter: 48mm plus magnetic ring 50MM

Shaft diameter: 5mm (same as 775 motor), shaft length: 16mm

The shaft length of the motor tail: about 6mm      

Small hole pitch of installation holes: about 29mm, using M4 screws

The distance between the large holes of the mounting holes: about 32mm, using M5 screws

Motor weight: 495g