P631
Baru
27 Barang item
Pemberitahuan: Barang terakhir di stok!
Tanggal ketersediaan:
Product introduction
The MCP2551 is a fault-tolerant, high-speed CAN device that can be used as a CAN protocol controller
and physical bus interface. The MCP2551 provides differential transceiver capabilities for the CAN
protocol controller and is fully compliant with the IS0-11898 standard, including the ability to meet
24V voltage requirements.
Typically, each node on a CAN system must have a device that converts
the digital signals generated by the CAN Controller into signals suitable for
bus transmission. lt also adds a buffer between the CAN controller and the
high-voltage spikes on the CAN bus, which may be generated by external devices.
Supports an operating rate of 1MB/S.
Meet the physical layer requirements of IS0-11898 standard.
Suitable for 12V and 24V systems. External slope control to reduce RFI.
Automatically detects ground faults at the TXD input.
Power-on reset and voltage event undervoltage protection.
Unpowered nodes or undervoltage will not affect the CAN bus.
-Low current standby operation.
Up to 112 nodes can be connected.