MH-M18 Stereo Bluetooth Audio Receiver Module 4.2 Lossless

P531-L2D14

Baru

89 item

Rp. 16.000


JumlahHargaAnda menghemat
10 Rp. 15.000 Sampai dengan Rp. 10.000

MH-M18 Stereo Bluetooth Audio Receiver Module 4.2 Lossless

This product MH-M18/M28/M38 is a low-power Bluetooth design scheme, supports the latest Bluetooth 4.2 transmission, two-channel stereo lossless playback, after the module is connected to Bluetooth, Bluetooth wireless transmission can be quickly realized, which is very convenient. In an open environment, the Bluetooth connection distance can reach up to 20 meters.

It is widely used in various Bluetooth audio receivers, various audio DIY modification, etc.

.

Function Description:

  1. Bluetooth V4.2 version, support Bluetooth automatic connection technology, support WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo dual-channel output.
  2. After the module is powered on, the mobile phone searches for the Bluetooth name MH-M18/MH-M28/MH-M38, and it can play music after connecting to the Bluetooth;
  3. Module blue indicator light:

When Bluetooth is not connected, the indicator light flashes quickly;

When the Bluetooth is connected, the indicator light is always on;

When Bluetooth is playing, the indicator light flashes slowly.

serial number

Pin

illustrate

1

KEY

Button control terminal (4 button functions, additional resistance is required

2

MUTE

Mute control terminal (output high level 3.3V when mute, output low level when playing)

3

VCC

Power supply positive 5V (Lithium battery 3.7V power supply requires short-circuit diode)

4

GND

Power negative

5

L

Left channel output

6

R

Right channel output

dio interface, or can be wired for the audio input of the power amplifier board (the interface L/R/AGND can be directly wired).

  • Precautions
  1. Signal interference: Bluetooth antennas are extremely susceptible to interference from high-frequency or strong electromagnetic signals, so please place them as far away as possible from wireless devices. And the board can not be close to metal objects, keep a certain distance.

 

  1. If there is current noise on the power amplifier board, the cause is caused by ground wire interference. It is recommended that you do not use plug-in wires at the output of the Bluetooth module , and you must solder the wires, especially the ground wires, and the wires should not be too long. The shorter the better. Thicker. The audio ground must be connected to the ground of the audio input end of the power amplifier. This ground point can be welded in different positions to achieve the lowest current sound. It is recommended that the Bluetooth and the power amplifier board be powered separately, and the Bluetooth ground and the power amplifier ground are isolated.

 

  1. Since this product is a bare board design, try not to touch the components on the board with your hands, which will easily cause static electricity to kill the chip and cause burnout.

Blog

Related Products