Waveshare Night Vision Camera Light Sense IR LED Board for Raspberry

Waveshare Night Vision Camera Light Sense IR LED Board for Raspberry

Features

• 3W high-power 850 infrared LED
• Onboard photoresistor, the ambient light detector
• Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
• Allows adding night vision function to RPi Camera (E) or RPi Camera (F)

How to Use

1. Connect the Infrared LED Board to the camera PCB by screws
   • The screw holes are used for both attachment and power supply
2. Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
   • When ambient light is lower than threshold value, the infrared LED is on, vice versa

NOTE : TIDAK SUPPORT UNTUK RASPBERRY CAMERA OFFICIAL (500W Pixel, Camera Raspberry V2,NoiR Camera)

WARNING :

• Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
• Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.