AT-09 BLE Bluetooth 4.0 TI CC254 HM-10 Compatible

AT-09 BLE Bluetooth 4.0 TI CC254 HM-10 Compatible

• AT+ command set on board
• Customizable baud rate, device name, and pairing PIN
• Automatically enters transparent serial mode after device is paired and connected
• Returns to AT command mode when disconnected
• Bluetooth version: V4.0
• Default baud rate: 9600
• Default serial port setting: 9600, N, 8, 1
• Voltage: 3.3V

• VCC:  input power supply 3.3~6V, Prohibit more than 7V
• GND: Ground
• TX:  transport
• RX:  receive  
• State: when bluetooth is connected , output "High level", "no conntected"  output "low level"
• en:when module is connected, give a high level to "EN",the module will disconnected.

datasheet : http://www.robotop.lv/en/index.php?controller=attachment?id_attachment=57

dokumentasi(ganti pasword dll) click